Spectra HV101 Rotating finishing laser + tripod + remote control (package)
If you are looking for an affordable yet reliable all-round finishing laser, the HV101 is exactly what you are looking for!
Horizontal and vertical alignment HV101
- This affordable entry-level model is suitable for installing walls or ceilings and essential finishing work such as tiling.
- This finishing laser is an ideal DIY helper.
- The HV101 can be used both horizontally and vertically and features a tripod connection on both the side and the bottom.
- So if you need to install a wall immediately after a suspended ceiling, you simply tilt the laser and you can get back to work right away!
Very versatile HV101
- The laser has a visible beam.
- This makes it possible to use the Spectra HV101 without a receiver.
- With the included remote control, you can operate the instrument from a distance of up to 30 meters.
- This makes it possible to hang the laser from a suspended ceiling and operate it simply from the ground.
- With the included target plate, alignment at height becomes even easier.
- In short, optimal ease of use.
Technical specifications
- Accuracy +/- 3 mm over 30 m
- Diameter range Visible up to 60 m
- Range with HR320: 300 m
- Self-leveling Yes
- Self-leveling range +/- 5 degrees
- Out-of-range warning Yes
- Laser stops rotating
- Tripod mount 5/8" plastic (2x, side and bottom)
- Power supply 2x D-Cell Battery
- Rechargeable via mains power No
- Scan angle Five angles: 3°, 8°, 45°, 90°, 180°
- Carrying case Yes
- Slope Yes
- Manual (between two known reference points)
- Dimensions 22 x 17 x 15 cm
- Weight 1.5 kg
- Operating time 50 hours
- Shockproof Yes
- Drop onto concrete 1.5 m
- Water and dustproof IP54
- Laser source 3R,
- Rotation speed Four speeds: 0, 50, 200, 600 rpm
Standard included
- Case
- Handheld receiver Spectra HR320
- Height-adjustable tripod
- Remote control RC601
- Baul
- Ruler
- Two D-cell batteries
- Two AA batteries
- Clear, Dutch-language manual
Comment