ProFit Multi Purpose Hole Saw Long Set 45/65/76/91/11/133 mm 092845130S0
This hole saw with carbide teeth and integrated Click & Drill® adapter is supplied without a centering pin. Application in wood, hardwood, chipboard and MDF, and abrasive materials such as soft stone, plasterboard, and sand-lime brick.
Special Features
- Multi Purpose Long hole saws with carbide teeth and integrated Click&Drill® adapter (0928).
- For deep holes up to 160 mm.
- Application in wood, chipboard, MDF, soft stone, wall tiles (up to scratch hardness 4), and plastics.
- Diameters from 32 to 210 mm.
- The carbide (HM) teeth can be resharpened.
- Center pin not included.
- Advantages of the Multi Purpose Long hole saws with integrated Click&Drill® adapter:
Quick change of the hole saw.
Sawing at an extreme angle. - Instructions for use of the Multi Purpose Long (MPL):
A. Pre-drill with a 10 mm masonry or wood drill bit.
B. Click the centering pin into the MPL hole saw.
C. Insert the centering pin into the pre-drilled hole and begin drilling carefully. - Note!
Use a drill with sufficient power due to the required torque for the MPL.
Dimensions depend heavily on use and application.
Maintain the speed as indicated on the supplied speed table. - Pre-drill a Ø 10mm hole in wood with auger bit 09287140 or in stone with masonry bit 09287141.
Technical data
- GLN8714757999990
- Product Group number0928 sets
- CBS Number82075090
- Centering bitDDC2L
- Diameter45, 65, 76, 92, 111, 133
- Case material T-loc systainer
- Applicable in material Cellular concrete, Sheet material, Wood
Comment