Milwaukee 4932430327 Hole Saw Box
Special Features
- Tooth Material - Type Matrix II premium high-speed steel is used for the tooth section of the hole saw
- Matrix II steel contains 8% cobalt, allowing the teeth to retain their original hardness even at high operating temperatures when used in metal sawing applications. - Bi-metal Construction - High-speed steel teeth are laser-welded onto a high-alloy steel body
- The teeth are subsequently vacuum-hardened to 65 HRC at a temperature of 600°C for maximum durability and service life. - Due to the high wear resistance of the Matrix II material, these hole saws are ideal for cutting difficult and hard materials such as stainless steel and acid-resistant steel, but also for softer materials such as wood.
- Hole saw body - The 1.27 mm thick steel body of the hole saw is rigid enough to maintain its shape, but naturally also has sufficient built-in elasticity.
- Advanced technology for maximum productivity.
- Tooth design - A tooth design with 3.5 teeth per inch and a positive tooth angle of 10° offers the following benefits: - Faster and more aggressive cut. - Improved heat dissipation during sawing ensures that the teeth remain sharp longer. - Deeper curved chip spaces ensure more efficient chip evacuation, preventing clogging and heat buildup. - The specially shaped tooth angle is less prone to snagging on thinner materials. - The teeth are alternately side set to minimize binding and friction. - Requires less feed pressure - This is achieved through the combination of aggressive tooth geometry and good chip evacuation, meaning less force is required during drilling.
- BASE plate hole saw - The base plate of the hole saw is made of thick steel
- This ensures dimensional stability even after intensive use. - Perfectly manufactured round base plates, important for large-diameter hole saws.
- Diagonal slots aid in the removal of the drilled material.
- Applications - Manufacturing techniques performed according to the highest quality standards ensure high concentricity accuracy
- Therefore, these hole saws are suitable for both hand drills and pillar drills (manual feed only).
- This series of hole saws is the perfect solution for cutting a wide variety of materials: – Steel with a tensile strength of up to 1000 N/mm². – Stainless steel and acid-resistant steel. – Non-ferrous metals. – Cast iron. – Aluminium. – Wood. – Fibreboard (MDF). – Gypsum board. – Sandwich materials. – PVC.
Technical data
- Supplied in: Plastic case
- Description: Hole saw case
Scope of delivery
- Holding shank with centering drill (item no. 49567010)
- Holding shank with centering drill (item no. 49569100). 2x centering drill, Allen key (item no. 49960060).
Comment