Milwaukee Hole Saw Set 10-piece 49224201
Features
- Tooth Design. Variable 4/6 teeth per inch tooth design with a positive 10° tooth angle offers the following benefits: - Faster and more aggressive cut. - Improved heat dissipation during cutting ensures the teeth stay sharp longer. - Deeper, curved tooth cavities provide more efficient material removal; this prevents clogging and heat buildup. - Specially shaped tooth angle has less tendency to jam in thinner materials. - Teeth are alternately set laterally to minimize clogging and friction. - Low feed pressure – this is achieved through the combination of aggressive tooth geometry and good material removal, requiring less pressure during drilling. Tooth material – Matrix II premium high-speed steel is used for the teeth of the hole saw. Matrix II steel contains 8% cobalt, allowing the teeth to retain their original hardness, even at high temperatures encountered in metal cutting applications, for example. - Bi-metal construction – high-quality steel teeth are laser-welded onto a high-alloy steel body. Subsequently, the teeth are vacuum-hardened to 65 HRC at a temperature of 600°C to provide maximum durability and service life. - Thanks to the high wear resistance of the Matrix II steel, the hole saws are ideal for cutting difficult and hard materials such as stainless steel, but also for softer materials such as wood.
- Hole saw body - The 1.27 mm thick steel body of the hole saw is rigid enough to retain its shape, but naturally also has sufficient built-in elasticity.
- Base plate hole saw - The base plate of the hole saw is made of thick steel. This ensures dimensional stability even after intensive use. - Perfectly manufactured round base plates, important for large-diameter hole saws.
- Diagonal slots aid in the removal of the drilled material.
- Applications - Manufacturing techniques performed according to the highest quality standards ensure high concentricity accuracy. Therefore, these hole saws are suitable for both hand drills and pillar drills (manual feed only).
- This series of hole saws is the perfect solution for cutting a wide variety of materials: – Steel with a tensile strength of up to 1000 N/mm². – Stainless steel and acid-resistant steel. – Non-ferrous metals. – Cast iron. – Aluminum. – Wood. – Fiberboard (MDF). – Gypsum board. – Sandwich materials. – PVC.
Supplied as standard
- Hole saws: ⌀ 25, 32, 40, 54, 68, 76 mm
- Recessing shaft - for hole saws ⌀ 14 - 30 mm (item no. 49567010)
- Recessing shaft - for hole saws ⌀ 32 - 152 mm (item no. 49569100)
- 2 x center drill
- 1 x ⅛″ Hex Allen key
Comment