Metal Works WEL03S Electric Heater 3.0kW 230V
Special Features
- 3.0 kW electric heater with coil resistance and tiltable angle.
- Suitable for heating offices, small spaces, keeping storage areas for liquids or collectors frost-free, etc.
- Suitable for heating spaces up to 174m³, depending on the insulation and ventilation of the room. The better the insulation value of the building elements (lower K-value), the larger the space you can heat.
- Maximum heatable volume of 174 m³, at a K-value of 0.5: provided the building is well insulated according to recent building standards.
- Minimum heatable volume of 34 m³, at a K-value of 2.5: in the case the building is not insulated, with single glazing, solid brick walls, a roof with old corrugated sheets, or for rooms where doors are regularly opened.
- Built-in thermostat with control knob
- Multi-position switch (1.5 kW – 3.0 kW) and fan mode
- Air flow rate of 286 m³/h
- IPX4 splash-proof
- CE approved
- Thermal protection against overheating
Advantages
- The round housing and optimized spiral resistance ensure a large blowing distance of the heated air
- Adjustable blowing angle of 0 - 20°, thanks to the tilt system with locking button. The heat can be directed safely
- Steel housing and base
- Consumes no oxygen and emits no moisture or odors. Also suitable for drying rooms
Technical data
- Heat output kW 3
- Heat type Ventilated air
- Energy source Electric
- Thermostat Yes
- Total consumption W 40/1400/3000
- Heatable space m³ 174
- Voltage V 230
- Frequency Hz 50
- Air flow rate m³/h 286
- Heatable space m² 30
- Noise level dB(A) 67
- Mobile Yes
- Weight kg 3.70
- Dimensions (lxwxh) mm 245x240x310
Scope of delivery
- Cable
- Plug
Comment