Loctite MR 3020 Gasket Enhancer 400 ml
Special Features
- LOCTITE® MR 3020 is a red, viscous, liquid synthetic resin adhesive/sealant in an aerosol can, specifically designed as an adhesive/sealant. Here are some key features:
- Fast drying: It dries quickly after application, making it suitable for situations where rapid assembly is required.
- Tacky film formation: It forms a very tacky film when drying, which helps to hold conventional pre-cut gaskets in place during assembly. This tacky film also improves sealing performance during use.
- Applications: It is primarily used to hold pre-cut gaskets in place during assembly and to improve sealing performance. This can be useful, for example, when assembling parts where gaskets are required to prevent leakage.
- Ease of use: Because it comes in an aerosol can, it is easy to apply to the desired surfaces.
- Overall, LOCTITE® MR 3020 offers a convenient solution for improving sealing performance and holding gaskets in place during assembly.
Strong points
- Very easy to apply from an aerosol can
- Can be used for rubber, cork, paper, metal, asbestos, and similar gaskets
- Dries to a very sticky, elastomeric film
- Remains sticky indefinitely
- Holds gaskets in place during assembly, even in vertical orientation
- Significantly improves gasket performance
- Petrol resistant, diesel, water, grease and oil
- Contains no solvents that deplete the ozone layer
- Very economical - one canister is sufficient for various applications
Hazard statements
- H222 : Extremely flammable aerosol.
- H229 : Pressurized container: may burst when heated.
- H319 : Causes serious eye irritation.
- H336 : May cause drowsiness or dizziness.
- H412 : Harmful to aquatic organisms, with long-lasting effects.
Safety recommendations
- P102 : Keep out of reach of children.
- P101 : If medical advice is needed, have the packaging or label available keep.
- P102 : Keep out of reach of children.
- P501 : Waste and residues must be disposed of in accordance with the relevant regulations of the local authorities.
- P210 : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 : Do not spray into an open flame or onto other ignition sources.
- P251 : Do not pierce or burn even after use.
- P261 : Avoid inhalation of dust/fumes/gas/mist/vapour/spray.
- P273 : Avoid release to the environment.
- P280 : Wear protective gloves/protective clothing/eye protection/face protection.
- P337 + P313 : If eye irritation persists: consult a doctor.
- P410 + P412 : Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F.
Technical data
- Physical FormLiquid
- ColorRed
- Content 400 ml
Comment