Loctite 406 Super Glue 20 grams
Special Features
- LOCTITE® 406 is a fast-acting adhesive with exceptionally low viscosity, specially developed for the rapid bonding of plastics and rubbers.
- Exceptionally low viscosity: The product has a very low viscosity, allowing it to be applied easily and spread well over the surfaces to be bonded.
- Fast bonding: LOCTITE® 406 ensures a fast bond, which is ideal for applications where quick fixing is required.
- Suitable for plastics and rubbers: It is specifically formulated for bonding plastics and elastomers, making it an excellent choice for projects using these materials.
- Use with cyanoacrylate primers: By combining LOCTITE cyanoacrylate primers with LOCTITE® 406, it can also be used on hard-to-bond plastics, expanding the range of applications.
Strong points
- Fast bonding of plastic and rubber, including EPDM
- LOCTITE SF 770 or LOCTITE SF 7239 primer improves the adhesion of hard-to-bond materials
- Low viscosity
Hazard statements
- H315 : Causes skin irritation.
- H319 : Causes serious eye irritation.
- H335 : May cause respiratory irritation.
Safety recommendations
- P261 : Avoid inhalation of dust/fumes/gas/mist/vapour/spray.
- P280 : Wear protective gloves/protective clothing/eye protection/face protection.
- P305 + P351 + P338 : IF IN CONTACT WITH EYES: Rinse gently with water for several minutes. Remove contact lenses, if present and easy to put on. Continue rinsing.
- P337 + P313 : If eye irritation persists: consult a doctor.
- P501 : Waste and residues must be disposed of in accordance with the relevant regulations of the local authorities. the national regulations.
Technical data
- Recommended for use withElastomer, Plastic, Rubber
- Application methodDosing system, Manual
- Shear strength, Mild steel - (grit-blasted)15.5 N/mm² (2250.0 psi )
- Main propertiesFixation: Fast fixation, Viscosity: Low viscosity
- Fixation time, Steel30.0 sec
- Physical formLiquid
- Gap filling0.12 mm
- Operating temperature-40.0 - 120.0 °C (40.0 - 250.0 °F )
- ColorTransparent
- ApplicationsBonding of plastics, Bonding of elastomers
- Curing typeMoisture-based curing
- Viscosity, Resin20.0 mPa.s (cP)
Comment