Gedore 1504 XL Mobile Workbench 308-Piece with 7 Drawers 2980355
Body
- Dimensions: H 985 x W 1250 x D 550 mm
- 30 mm thick beech plywood top, surface extra protected by linseed oil varnish
- Large storage space with shelf and door › safety for people thanks to heel protection
- Sheet steel, corrosion-resistant and scratch-resistant powder-coated, GEDORE blue
Drawers
- Centrally lockable via cylinder lock
- 1 XL drawer (W 1055 x D 400 mm), 6 wide drawers (W 640 x D 400 mm), fully extendable, removable
- Safety lock per drawer, one-hand operation
- Ball-bearing guide rails
- Individually configurable using drawer dividers and cross partitions (also available separately)
- Drawers loadable up to 40 kg, bottom heavy-duty drawer up to 60 kg
- Sheet steel, corrosion-resistant and scratch-resistant powder-coated, GEDORE blue
High-quality GEDORE base
- Total load capacity 700 kg, 500 kg for mobile use
- 2 high-quality roller-bearing GEDORE castors (fixed castors Ø 200 mm)
- 2 smooth-running ball-bearing GEDORE castors (swivel castors Ø 125 mm), both with driving and swivel locking
- GEDORE Trapezoidal shaft construction ensures smooth running, maneuverability, and stability even under maximum load
Accessories
- 10 drawer dividers (LV) and 2 cross dividers (DS) made of galvanized sheet steel
Options
- Optimally fillable with GEDORE tool modules (1500 ES/1500 CT or 2005 CT)
- Expandable with rear panel R 1504 XL-L
- Other drawer variants on request
- Special colors and versions on request
Standard included
- Reversible ratchet 1/4" 127 mm
- Socket wrench 1/4", 12-point UD profile 4 mm
- Socket wrench 1/4", 12-point UD profile 5 mm
- Socket wrench 1/4", 12-point UD profile 5.5 mm
- Socket wrench 1/4", 12-point UD profile 6 mm
- Socket wrench 1/4", 12-point UD profile 7 mm
- Socket wrench 1/4", 12-point UD profile 8 mm
- Socket wrench 1/4", 12-point UD profile 9 mm
- Socket wrench 1/4", 12-point UD profile 10 mm
- Socket wrench 1/4", 12-point UD profile 11 mm
- Socket wrench 1/4", 12-point UD profile 12 mm
- Socket wrench 1/4", 12-kt UD profile 13 mm
- Cardan extension 1/4" 97 mm
- Sliding handle 1/4" 115 mm
- Socket wrench 1/4", male-TORX E10
- Socket wrench 1/4", male-TORX E4
- Socket wrench 1/4", male-TORX E5
- Socket wrench 1/4", male-TORX E6
- Socket wrench 1/4", male-TORX E7
- Socket wrench 1/4", male-TORX E8
- Screwdriver bit 1/4" IS 4 mm
- Screwdriver bit 1/4" IS 5.5 mm
- Screwdriver bit 1/4" IS 6.5 mm
- Screwdriver bit 1/4" IS 8mm
- Screwdriver bit 1/4" IN 2.5 mm
- Screwdriver bit 1/4" IN3mm
- Screwdriver bit 1/4" IN4mm
- Screwdriver bit 1/4" IN5mm
- Screwdriver bit 1/4" IN6mm
- Screwdriver bit 1/4" XZN M5
- Screwdriver bit 1/4" XZN M6
- Screwdriver bit 1/4" T6
- Screwdriver bit 1/4" TORX T7
- 3C screwdriver with impact cap Phillips PH1
- 3C screwdriver with impact cap Phillips PH2
- Bench hammer with ash handle 500g
- Center point 120x12x5 mm
- Pin driver 1.5 mm
- Pin driver 3 mm
- Pin driver 4 mm
- Cold chisel 8-point 250x24 mm
- Mirror chisel 8-point, 125x10x5 mm
- Punchet 8-point 120x12x5 mm
- Check-Tool module empty
- Water pump pliers 10" 15-way adjustable
- Combination pliers Power 180 mm 2-component handle
- Telephone and crimping pliers 200 mm 2-component handle
- Side cutting pliers Power 180 mm 2-component handle
- Spiral
Comment