Fischer Construction Collar Plug S12 FUS 50 pieces
For mounting frame angles with a 13mm through-hole in calcium silicate brick.
Advantages
- 2-way expansion allows targeted mounting near the edge.
- Extra-large collar prevents contact between bolt and attachment part and thus corrosion.
- High-quality nylon guarantees trouble-free and long-lasting operation in masonry.
- 12 mm diameter ideal in combination with countless steel angles in masonry and calcium silicate brick UNIQUE IN THE MARKET!
- Safety screw with large core diameter ensures extra expansion and thus very high loads.
- Recommended load value in calcium silicate brick: 1.5 kN!
Characteristic properties
- Specially designed for anchoring steel frame angles with 13mm through-hole.
- Safety screw with large core diameter ensures extra expansion and thus very high loads.
- Extra-large collar prevents contact between bolt and attachment part and thus corrosion.
- High-quality nylon guarantees trouble-free and long-lasting operation in masonry.
Building materials
- Solid sand-lime brick, Solid brick, Cellular concrete.
Installation
- Mark the position of the holes with a melt line or laser.
- Drill the holes in the sand-lime brick.
- Insert the S12 FUS construction collar plug into the steel angle.
- Insert the anchor into the drilled hole, ensuring that the expansion forces act parallel to the edge of the sand-lime brick to prevent chipping.
- Tighten the anchor with a cordless screwdriver until the collar of the plug is slightly flattened; the use of an impact wrench is not recommended!
Technical data
- Plug length l 60 [mm]
- Drill diameter d0 12 [mm]
- Screw length ls 69 [mm]
- Min. drilling depth for through-hole mounting h2 75 [mm]
- Screw diameter ds 7.0 [mm]
- Shaft T40/SW13
Standard included
- 50 pieces
Comment