Fischer 501409 Through-Anchor FAZ II 10/50 Stainless Steel A4 20 pieces
The stainless steel bolt anchor for the most demanding requirements in concrete. Strong and flexible. Strong and flexible. The fischer Through-Anchor FAZ II A4 is the stainless steel anchor for the highest demands. With this anchor, heavy loads are secured in cracked concrete. Thanks to its simple installation, the FAZ II A4 can be used particularly flexibly. The proven expansion clip guides the loads particularly reliably into the concrete and ensures the highest load-bearing capacity. With the stainless steel version, loads are secured outdoors. The steel anchor is, for example, ideally suited for fastening railings, consoles, steel structures, and gates.
Advantages
- With the proven expansion clip, the highest load-bearing capacities are possible. As a result, fewer fastening points and smaller anchor plates are required.
- Fewer hammer blows and minimal tightening slip ensure noticeably easier and more comfortable installation.
- International approvals guarantee optimal safety and the best performance. Applications in earthquake zones (Seismic) are also covered by these approvals.
Characteristic properties
- Strong fastening: The expansion clip guaranteed maximum load-bearing capacity.
- Fewer fastening points and smaller anchor plates save time and costs.
- Easy assembly: fewer hammer blows and minimal tightening slip.
- This saves time and force.
- Stainless steel: maximum safety for outdoor use.
Applications
- Steel structures, Handrails, Consoles, Ladders, Cable trays, Machinery, Stairs, Fencing, Facade systems, Timber structures.
Building materials
- Approved for: Concrete C20/25 to C50/60, cracked and uncracked
- Also suitable for: Concrete C12/15 C80/95 (classification available)
Approval
- ETA-05/0069 DoP No. 0009 DoP No. 0081 DoP No. 0121 DoP No. 0756-CPD-0062 ESR-2948
Mounting
- The FAZ II is suitable for through-hole and front-hole mounting; also suitable for stand-off mounting under certain conditions.
- Prior to mounting, place the hexagon nut in the optimal position (the insert pin protrudes approx. 3 mm from the hexagon nut).
- When torque is applied, the conical bolt is pulled into the expansion clamp, thereby clamping it against the borehole wall.
- The head relief allows for easy use of the anchor.
- For series installation, we recommend the use of the FABS anchor bolt mounting aid.
Technical data
- Approval ICC approval
- Seismic approval C1/C2
- Borehole diameter d0 10 [mm]
- Min. borehole depth for through-hole mounting h2 125 [mm]
- Plug length l 135 [mm]
- Max. useful length lift, stand/lift, red tfix 50/70 [mm]
- Thread Ø x length M 10 x 93 [mm]
- Wrench width SW 17 [mm]
Supplied as standard
- 20 pieces
Comment