Fischer Injection Sleeve Plastic FIS H 12 x 50 K 41900 50 pieces
Special features
The versatile fastening system with injection sleeves for perforated brick masonry. The fischer Injection Sleeve FIS HK plastic is the ideal system component for use with fischer Injection Mortar in perforated brick masonry. To do this, the injection sleeve is inserted into the borehole and filled with mortar from the bottom of the sleeve. When inserting the anchor rod or the internal threaded impact anchor, the mortar is pressed through the grid structure and bondes snugly with the perforated brick. This transfers the load to the building material. With the help of the injection sleeve, non-load-bearing layers can also be bridged.
Advantages
- The grid structure of the FIS HK injection sleeve is matched to the FIS V injection mortar and ensures economical mortar consumption with optimal connection of the mortar to the walls of the boreholes.
- The centering wings ideally align the fastening element within the injection sleeve and allow the use of different threaded rod diameters.
- Barbs hold the injection sleeve firmly in the borehole, thus enabling trouble-free overhead installation.
- The geometry of the anchor sleeves allows for bridging non-load-bearing layers for easy and simple installation. Please take into account the approvals of the relevant injection mortar.
Characteristic properties
- Grid structure reduces mortar consumption.
- The injection sleeves enable an optimally fitting connection in perforated brick.
- The centering wings secure anchor rods of various diameters. This reduces complexity and inventory management.
- Barb: during overhead installation, these do not fall out of the drill hole.
- ETA approval.
Applications
- Anchors in perforated masonry with Injection Mortar FIS V.
Building materials
- Approved for: Perforated brick, Hollow lightweight concrete block, Hollow concrete block, Perforated sand-lime brick, Solid sand-lime brick, Solid brick
- Also suitable for: Perforated pumice NoHoBo floor Solid pumice and other solid building materials
- The details (building materials, loads, etc.) of the available approval apply.
Approval
- ETA-10/0383 ETA-10/0383 ETA-15/0263 DoP No. 0026 DoP No. 0126 DoP No. 0756-CPD-0361
Installation
- Depending on the application, the FIS HK injection sleeve can be used with the injection mortars FIS V, FIS V HIGH SPEED, and FIS V LOW SPEED. The FIS P can be used without approval.
- In combination with injection sleeves and threaded rods FIS A or internal threaded impact anchors FIS E, the system is suitable for through-hole mounting.
- To do this, the injection sleeve is inserted into the borehole and filled with injection mortar from the bottom of the injection sleeve.
- When screwing in the fastening element, the mortar is pressed through the grid structure of the injection sleeve and bonds snugly with the anchoring substrate. The load is appropriately dissipated over the entire surface.
Technical data
- Approval
- Borehole diameter d0 12 [mm]
- Min. borehole depth h1 60 [mm]
- Min. anchoring depth hef 50 [mm]
- Suitable for FIS A M6-M8
- Mortar quantity per sleeve 5 [scale divisions]
Standard delivery
- 50 pieces
Comment